Imprint

Privacy Policy

Shipping

Faqs

Product Catalogue

Data Sheets

Material Profiles

Contact

Story

Career At Extrudr

<b>Print your pen holder as a small gift for the start of school</b>

"Back to School" has never looked so good with this 3D printed pen holder. Simple to print, it's the perfect way to keep your pens organized as you dive into the new academic year. Choose your favorite color of our Extrudr filament, and add a personal touch to make it uniquely yours.&nbsp;

Back2School.zip

final-back-to-school-04.jpg

Back to School

XPETG MATT red 1,75 mm 1 kg

<b>3D-Printed Outdoor Lamp – Easy &amp; Practical!&nbsp;</b>

Print your own outdoor lamp for smartphones! This easy-to-print design requires almost no time to print, and the flexible clip comes in different sizes to fit any smartphone.

We've all been there – using a plastic bottle over a phone flashlight to create softer, more even lighting. Now, with our outdoor lamp, you have the perfect solution! Take it on your next adventure, use it on your terrace, or bring it along for a cozy night by the lake.

Extrudr_Camping Light All Sizes.zip

_MG_5563-Edit.jpg

_MG_5550.jpg

_MG_5915-Edit.jpg

Outdoor Lampe

PETG transparent 1,75 mm 1,1 kg

Outdoor Lamp

Turn your empty&nbsp;Extrudr spools into storage space with these drawers.

In the file are stackable half height and stackable third height drawers. They are sorted into folders, the plain ones don't have the edges for labels. 

Print the drill template to drill in the correct places. Just turn it upside down and align the peg with the hole. Either mark the locations of the holes or simply drill through them. You need to drill the holes with a 5 mm or 1/5" drill.

Drill the holes in both top and bottom. Glue the bottom pin to the bottom of the spool, this helps making it more stable, especially with the stacked third heights.

The bottom pin gets glued in from the outside, avoid getting glue on the pin itself.

Thanks to our maker "Oachkatzl" who provided us with the files and the idea. Check out his makerworld account <a href="https://makerworld.com/en/@Oachkatzl">here</a>.&nbsp;

Extrudr_Storage_Drawer.zip

Extrudr_Spool_Storage.jpg

NZ8_4856-2.jpg

Extrudr_Spool_Storage_2024-Jan-19_04-54-52PM-000_CustomizedView13610596150.png

Extrudr_Spool_Storage_2024-Jan-19_05-22-28PM-000_CustomizedView35891345853.png

Spulen Schubladen 

PLA NX2 white 1,75 mm 1 kg

Spool Storage Drawers

This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Back to School

Material

XPETG MATT

Filamentfarbe

rot

Unterstützung

nein

Lizenz

Weitere inspirationen

Outdoor Lampe

Spulen Schubladen

Wasserpistole

Suche

Back to School

Material

XPETG MATT

Filamentfarbe

rot

Unterstützung

nein

Lizenz

Weitere inspirationen

Outdoor Lampe

Spulen Schubladen

Wasserpistole