Extrudr - High Quality Filament

PLA NX2

Polylactides are polylactic acids that belong to the polyesters and are made up of lactic acid molecules. For NX2 Extrudr has developed special properties to further improve the material.

PLA NX2 is a new generation of PLA with improved mechanical properties. The optimized interface provides detailed print quality.

Good tensile strength
UV-resistant
Food approval

Buy PLA NX2 in our shop

Printing Properties

Printing Temperature

200–230°C

Print Bed Temperature

20-60°C

Printing Speed

40-60 mm/s

Material Information

Values according to ISO 527

Values according to ISO 306

Material Properties

Maximum Stress

good

Elongation at Break

better tensile stretch properties than regular PLA

Temperature Resistance

up to 60°C

Ease of Printing

suitable for beginners

Visual Quality

matte surface with visibly reduced layers

Layer Adhesion

very good

Impact Resistance

high

Wiki-Tech

History

The discoverer of the polyactides is the French chemist Théophile-Jules Pelouze, who observed the formation of oligomers and polymers in 1845 during an experiment with lactic acid.

Manufacture

Polyactides belong to the polyesters and are composed of many lactic acid molecules bound to each other.

In the production of the material, lactic acid is fermented via a multi-stage synthesis of sugar. Today, lactic acid is obtained from glucose and molasses. These lactides, as the annular lactic acid molecules are called, can then be polymerized to PLA.

The Exrudr PLA NX2 is a further development of the well-known PLA NX1. With special additives, the mechanical load capacity of the PLA NX2 could be increased, which opens up further areas of application.

3D-Printing

The PLA filaments used for 3D printing are also not pure PLA plastics, but so-called "PLA blends", i.e. mixtures in which special additives are inserted so that the material can withstand the special application conditions. In most cases, materials are developed and manufactured specifically for the respective conditions. This guarantees high efficiency and consistency. The PLA materials are particularly suitable for beginners due to their ease of use.

Technical data

As a biomaterial, the PLA also has no unpleasant odor in the molten state. In addition, PLA absorbs little moisture during storage. PLA NX2 is more UV resistant than normal PLA. The good mechanical properties also open up a wide range of applications for this material.

Due to the mechanical properties, not everything is possible during the post-processing of the printed part. Especially drilling and milling should be avoided. It is also not possible to edit with acetone, as the PLA is resistant to acetone. Other machining methods such as gluing, painting or grinding can be carried out without any problems.

Applications

PLA is mainly used in the packaging industry. Particular emphasis is placed on biodegradability. For example, hygiene products or carrier bags are often made of PLA. Again, it is not the raw PLA that is used, but mixtures that have been specially developed for the application. Furthermore, packaging, foils, straws, fibers as suture material in the medical field or composite materials from PLA are also produced.