GreenTEC Pro

GreenTEC Pro comes from our BIO performance range and has been specially developed for high-performance applications. The material has a heat resistance of 160°C (VST) and is optimized for high tensile and flexural strength. The material is characterized by good flexural strength and low warping as well as by the high-quality surface.

GreenTEC Pro is the ecologically harmless alternative to common industrial materials, consisting of 100% renewable raw materials and biodegradable according to DIN EN ISO 14855. In addition, the raw material is approved for usage with food (FDA).

  • Heat resistance up to 160°C
  • Good tensile and bending strength
  • Low Warping
  • High stability
  • Smell-free
  • Biodegradable
  • Made from 100% renewable raw materials
Buy GreenTEC Pro in our shop

Material Information

Values according to ISO 527

Values according to ISO 527

Values according to ISO 306

Material Properties

Maximum Stress
Maximum Stress
sehr hoch
Elongation at Break
Elongation at Break
gut
Temperature Resistance
Temperature Resistance
bis 160°C
Ease of Printing
Ease of Printing
leicht fortgeschritten
Visual Quality
Visual Quality
sehr hoch, matte Oberfläche mit geringer Layersichtbarkeit
Layer Adhesion
Layer Adhesion
sehr gut
Impact Resistance
Impact Resistance
gut

Wiki-Tech

History

GreenTEC was launched by Extrudr in 2016 in an initiative for ecologically harmless filaments. The aim was to develop a biodegradable high-performance filament that can withstand mechanical influences similar to oil plastics, e.g. ABS. It should be usable for technical applications without any problems but should be made from biologically safe substances. In addition, the odor loads should also be reduced to allow users to have a pleasant printing experience.

After the success of the normal GreenTEC, the technical features should improve even more. Therefore, GreenTEC Pro was developed and released in 2018, which is intended to serve the technical applications in particular. The impressive technical properties exceed the oil-based materials in many ways.

Manufacture

Extrudr GreenTEC Prois made of a high-performance bioplastic. Due to the organic origin of this material, GreenTEC Pro is a perfect alternative to ordinary oil-based plastics.

3D-Printing

GreenTEC is very easy to print, similar to PLA or PETG. No special prior knowledge is required, which is why even beginners can cope well with the material. The countless advantages over the more difficult to print ABS and the organic origin of the material enables it to be used in almost every project.

Technical data

GreenTEC Pro is a very heat-resistant material with better properties than conventional oil plastics. Due to the slight flexibility of the material, it is well equipped against external impacts. The material can also withstand mechanical and thermal loads.

GreenTEC Pro is well able to keep up with conventional oil plastics due to its high thermal and mechanical load capacity and is known as an all-round material due to its simple processing.

Applications

Thanks to its excellent mechanical properties, the GreenTEC Pro can be used in a wide range of areas. Even in contact with food, the material is safe due to FDA certification. At the same time, it can shine in industrial applications.

In contrast to the normal GreenTEC, GreenTEC Pro has even better mechanical properties and is therefore suitable for almost all applications.

Areas of Use

High-performance industrial applications, biological applications, all-round material

Wide color range
FDA compliant
RoHS compliant
Reach compliant
Odorless